Kenwood HM-582 Instruction Manual Download

Page: 74 / 84

Timer operation

Preparation section

Basic section

Application section

Knowledge section

Contents

The timer operation will not occur if the program is not set to
ON.

Set the program.

Now the program timer reservation is complete.
Use the same procedure as above when you want to
reserve a program timer operation in PROG.2.

Select “ON” or “OFF” by rotating the volume/
multi-control knob, then press the set key.

Blinks

When ON is set

Ensure that the power is OFF.

Select the preset station No.

Press the set key.

ANALOG

MONO

Select the preset sta-
tion No.

Select the broadcast station

(only when TUNER is selected).

Press the set key.

Select the recording unit.
(only when TUNER or AUX is selected)

With timer recording of radio broadcasting, the audio is muted automatically at the moment the power is switched ON by
the timer.

(

The reservation contents cannot be cleared. The contents are cleared only when they are changed.

If the

/timer

indicator blinks in amber when the power is switched OFF (Standby), the timer will not be executed.

In this case, set the clock again.

After the timer has been set and power is off (timer standby), if there is a power failure or the power cord is unplugged
from and plugged again into the power outlet, the standby/timer indicator blinks in amber. In this case, set the clock again.

Select the source to be played.

Press the set key.

TUNER
CD
MD
AUX (Analog)
DIGITAL AUX (Digital)

Select the input source.

Notes

Select the broadcast station (only when TUNER is selected).

AU TO

PROG.1

‰

TONE
PROG

volume/

multi-control

SOURCE

TUNER

TONE
PROG

TUNER P01

90.00MHZ

volume/

multi-control

volume/

multi-control

volume/

multi-control

The set program contents are displayed when the
program is set to

“ON”

volume/

multi-control

The remote control unit can be used only to set the timer
activation ON or OFF. The time setting should be per-
formed on the main unit.

O.T.T.

PROG.1

PROG.2

PROG.1, 2

Goes off (OFF)

Each press switch the modes as follows.

TIMER

t i m e r

Remote control unit operation

Press the

/timer key to switch the power

OFF (standby).
(The

/timer indicator lights in amber.)

Be sure to adjust the clock before setting the timer.

Summary of Contents for HM-582





















































































Search results

Summary of Contents for HM-582

Reviews:

Related manuals for HM-582

Brands by name

Popular brands

Kenwood HM-582, Instruction Manual

Search results

Summary of Contents for HM-582

Reviews:

Related manuals for HM-582

Brands by name

Popular brands