Kenwood HM-582, Instruction Manual

Page: 60 / 84

60
MD Edit Functions
Preparation section
Basic section
Application section
Knowledge section
Contents
1
Activate the title input mode.
When titles are assigned to a disc and its tracks, the titles cannot only be displayed during playback but title
search (searching a track by the title) is also made possible. The assigned titles can be changed or deleted with
the same procedure.
1
Press the TITLE INPUT key.
To abort operation, press the TITLE INPUT key again.
3
Set the selection.
2
Select the title to be edited.
Select “DISC” .
Total number of title characters
Up to 1792 characters can be input per disc and up to
80 characters can be input per track. (In case of
alphanumeric and symbol characters)
A space (blank character) also required the same
amount of data as alphanumeric characters. When
deleting a title, it is not recommended to overwrite
spaces on previous characters but use the (CLEAR/
DELETE) function.
Œ„
To advance
To return
In case of disc title :
In case of track title :
Select the desired track No.
(The track can also be selected using the numeric keys.)
Assigning a title to a disc or track
(Remote control unit only)
Each press of the
4
or
¢
keys switches the operation.
1
DISC •••••••••••••••• (Disc title) *1
2
001, 002, ••••••••••• (Track title) *2
3
ALL ERASE ? ••••• (Complete erasure of disc and
track titles)
4
[1], [2], [3] ••••••••• (Title Memo) *3
Before using the editing function, press the PGM/
CHARAC. key so that “TRACK” lights.
Select the “MD” input.
£
TITLE
DISC ÷÷÷÷÷÷÷÷÷
TONE
A.P.S.
TITLE
INPUT
TITLE INPUT
SET
¢ 4
P.CALL
TITLE
001 ÷÷÷÷÷÷÷
TITLE
DISC ÷÷÷÷÷÷÷
*1 When step
1
-
1
is performed in stop mode, the
display starts with the disc title.
*2 Each press of the
4
or
¢
key displays a track title
in sequence from “ 001 ”, “ 002 ”.... When all track
titles have been displayed,
3
then
4
will be dis-
played.
When step
1
-
1
is performed in play mode, the
display begins with the information on the track
being played.
*3 Each press of the
4
or
¢
key causes the selected
title memo number to blink, after which
1
then
2
will be displayed.
÷
With a track without a title, the display shows “·······” .