Kenwood HM-582 Instruction Manual Download

Page: 17 / 84

Menu mode

Knowledge section

Preparation section

Application section

Basic section

Contents

The contrast of the LCD display on the main unit
can be switched as desired.

Blinks

LCD contrast adjustment (CONTRAST)

Adjust the contrast when the LCD display is hard to read
due to a problem in the installation position or to the
ambient temperature condition, etc.

TIME

/SPACE

ONTRAST

–

00000

• • • • • • • • • •

TONE

MY Bestso

‰

TONE

CROLL

IDDLE

My Bestson

TONE

ACK

IGHT

0HIGH

‰

ACK

IGHT

HIGH

‰

TONE

If the LCD display is hard to view (due to too high or low
contrast), press and hold the display key on the main unit
for more than 2 seconds. This resets the contrast to the
initial value.

The brightness of the back light of the LCD panel can
be switched as desired.

Blinks

LCD back light adjustment (BACK LIGHT)

Blinks

LCD scroll speed adjustment

Adjust the contrast when the LCD display is hard to read
due to a problem in the installation position or to the
ambient temperature condition, etc.

When CD text or MD title characters scrolled on the
LCD panel are hard to read, the scrolling speed can
be switched as desired.

Title display mode

Press the TIME/SPACE key repeatedly to enter

title display mode.

Select the “CD“ or “MD“ input.

)£

Title is scrolled.

Press and hold the TIME/SPACE key for more
than 2 seconds.

Repeat step

until the desired scroll speed is

selected.

Pressing and holding the

TIME/SPACE

key for more than

5 seconds resets the scroll speed to the initial value.

“SCROLL FAST +“

High speed

(Initial value)

“SCROLL MIDDLE“

Middle speed

“SCROLL SLOW“

Slow speed

The scroll speed is switched every time the
operation is repeated.

Press the menu/demo key.

Rotate the volume/multi-control knob to select
“CONTRAST ?”, then press the set key.

Select the desired brightness (display density)
by rotating the volume/multi-control knob, then
press the set key.

TIME

/SPACE

Press the menu/demo key.

Rotate the volume/multi-control knob to select
“BACK LIGHT ?”, then press the set key.

Select “LOW” or “HIGH” by rotating the vol-
ume/multi-control knob, then press the set key.

Summary of Contents for HM-582





















































































Search results

Summary of Contents for HM-582

Reviews:

Related manuals for HM-582

Brands by name

Popular brands

Kenwood HM-582, Instruction Manual

Search results

Summary of Contents for HM-582

Reviews:

Related manuals for HM-582

Brands by name

Popular brands