Kenwood DNX5380 Instruction Manual Download

Page: 46 / 107

Return to the Top page

Radio, TV

7 Sub function menu

The following functions can be performed by using keys in this area.
•

Switches the band

: Touch the desired band name.

•

Tunes in a station

: Touch [

] [

]. The method of frequency switching can be changed. See

Multi

function menu (P.45)

The bar in center (tuner only) shows the current frequency location.

8 List switching key

Touch to switch between the preset list and the information list.
In tuner mode, radio text plus will be displayed (for models with region code 2 or 3 only).

Multi function menu

The functions of each key are as follows.

[P1] - [P6]

Selects the preset station. Touch for 2 seconds to store the current station into the preset memory.

[

]

Displays the list of preset stations or channels.

[TI] (FM Tuner for models with region code 2 or 3 only)

Sets the traffic information mode on. For details, see

Traffic Information (P.50)

[SEEK]

Switches the seek mode in the following sequence; [AUTO1], [AUTO2], [MANUAL].
•

AUTO1

: Tunes in a station with good reception automatically.

•

AUTO2

: Tunes in stations in memory one after another.

•

MANUAL

: Switches to the next frequency manually.

[AME]

Selects the auto memory mode. For details, see

Auto memory (P.48)

[PTY] (FM Tuner for models with region code 2 or 3 only)

Searches a program by setting program type. For details, see

Search by program type (P.49)

[CRSC] (FM Tuner for models with region code 4 or 6 only)

Switches to monaural to decrease noise when reception is poor.

[MONO] (FM Tuner for models with region code 2 or 3 only)

Select the Monaural reception.

[LO.S] (FM Tuner for models with region code 2 or 3 only)

Turns the Local Seek function on or off.

[

SETUP]

Touch to display the SETUP Menu screen. See

Setting Up (P.68)

[

AUDIO]

Touch to display the Audio Control screen. See

Controlling Audio (P.80)

[

EXT SW]

Touch to control the external device power supply. For details, see

External Device Control (P.79)

Summary of Contents for DNX5380












































































































Search results

Summary of Contents for DNX5380

Reviews:

Related manuals for DNX5380

Brands by name

Popular brands

Kenwood DNX5380, Instruction Manual

Search results

Summary of Contents for DNX5380

Reviews:

Related manuals for DNX5380

Brands by name

Popular brands