Kenwood DNX5380 Instruction Manual Download

Page: 92 / 107

Return to the Top page

Remote Controller Operation

Key

Name

Location of

the mode switch

Function

VOICE

AUD, TV

Switches navigation display on/off.

DVD

Displays the DVD menu.
Turns the playback control on or off while playing VCD.

NAV

Speaks the voice guidance.

VIEW

AUD, DVD, TV

Switches the AV source to be output.

NAV

Switches between 2D and 3D map displays.

MAP DIR

AUD, DVD, TV

Switches the display angle each time it is pressed.

NAV

Switches between the heading up navigation and north up

navigation map displays.

∞

AUD, DVD

Selects the folder to be played.

During radio source in AUD mode, switches the bands to be

received.

Switches between the station of the TV band to be received.

AUD, DVD

Selects the track or file to be played.

During radio source in AUD mode, switches to broadcast stations

received by the unit.

Selects the channel to be received.

Numeric

Keypad

AUD

Specifies the number to search in direct search.

For details on the direct search mode, see

Direct search mode

(P.89)

During radio source, this key functions same as in TV mode.

DVD

• Press [1] [2] to fast forward/backward. Switches the fast forward/

backward speed each time you press this key.

• Press [4] [5] to slow forward/backward. Switches the slow

playback speed each time you press this key.*

*DVD only

Press the number of the memorized station to tune in ([1] - [6]).

* +

DVD

Clears the number.

# BS

AUD, DVD, TV

Switches to the direct search mode.

For details on the direct search mode, see

Direct search mode

(P.89)

AUDIO

DVD

Switches the voice language each time you press this key.

CANCEL

DVD

Displays previous screen.

NAV

Cancels the operations.

SUBTITLE

DVD

Switches the subtitle language.

−

When a call comes in, answers the call.

ANGLE

DVD

Switches the picture angle each time you press this key.

Vol

5∞

−

Adjusts the volume.

ZOOM

DVD

Switches the zoom ratio (1, 2, 3, Off ) each time you press this key.

2 ZONE

AUD, DVD, TV

Switches the Dual Zone function on and off.

R.VOL

−

Adjusts volume at rear when the Dual Zone function is on.

ATT

−

Lowers the volume by pressing the key once.

Restores the previous volume by pressing the key twice.

Summary of Contents for DNX5380












































































































Search results

Summary of Contents for DNX5380

Reviews:

Related manuals for DNX5380

Brands by name

Popular brands

Kenwood DNX5380, Instruction Manual

Search results

Summary of Contents for DNX5380

Reviews:

Related manuals for DNX5380

Brands by name

Popular brands