Kenwood DNX5380, Instruction Manual

Page: 87 / 107

86 86
Return to the Top page
Audio Setting Up
Zone Control
You can select different sources for both
front and rear positions in the vehicle.
1
Touch [Zone Control].
Zone Control screen appears.
2
Touch [Dual Zone].
3
Set each source as follows.
[
3
] (Front Source, Rear Source)
Select the audio source for each.
[
∞
], [
5
] (Rear VOL.)
Adjusts the rear channel volume.
[Single Zone]
Touch to turn off the dual zone function.
NOTE
• When the rear speaker sound is switched, the
audio source that is output at the AV OUTPUT
terminal is also switched to the same source.
• When the dual zone function is set to on, the
following functions are not available.
• Output from the subwoofer
• Subwoofer Level/Bass Boost
(P.83)
• Equalizer Control/Space Enhancer /
Listening Position
(P.84, 86, 87)
• DSP Bypass Control /Speaker Setup/Car
Type (DTA) Setup
(P.83, 80, 82)
Space Enhancer
1
Touch [Space Enhancer].
Space Enhancer screen appears.
2
Touch [Small], [Large], or [OFF].
Each setting value indicates the
soundscape level.
NOTE
• This setting is not available during tuner source.