Kenwood DNX5380, Instruction Manual

Page: 12 / 107

11
Return to the Top page
Basic Operations
Initial setup
Perform this setup when you use this unit first time or when you reset the unit (P.94) .
Set each item as follows.
Language
Select the language used for the control screen and setting items. Default is “British English (en)” for
models with region code 2/3/4 and “Chinese“ for model with region code 6.
1
Touch [SET].
2
Touch [
2
] or [
3
] to select the desired language.
3 Touch [Enter].
For detailed operation, see
Language setup (P.70)
.
Angle
Adjust the position of the monitor. Default is “0”.
1
Touch [SET].
2
Touch desired angle number and [ ].
For detailed operation, see
Monitor angle control (P.74)
.
iPod AV Interface Use
Set the terminal which your iPod is connected to. Default is “iPod”.
1 Touch [iPod] or [AV-IN2].
Color
Set the screen and button illumination color. You can select whether to allow color scan operation or
select a fixed color for operation.
1
Touch [SET].
2
Touch [ON] or [OFF] of [Panel Color Scan].
3 If you want to change color, touch [SET] of [Panel Color Coordinate].
4
Touch your desired color and [ ].
For detailed operation, see
Panel color coordinate (P.74)
.
EXT SW
Control the external devices.
1
Touch [SET].
2
Set device name, output pattern, and pulse set for each device. Then, touch [ ].
For detailed operation, see
EXT SW setup (P.72)
.
Camera
Set the parameters for the camera.
1 Touch [SET].
2
Set each item and touch [ ].
For detailed operation, see
Camera Setup (P.77)
.
1
Continued