Kenwood DNX5380, Instruction Manual

Page: 71 / 107

70 70
Return to the Top page
Setting Up
Drawer Close
Sets whether to close the common menu
(P.18)
automatically. Default is “Auto”.
Animation
Sets whether to display animation. Default is “ON”.
Secondary
Sets whether to display the navigation
information in the audio screen or vice versa.
Default is “ON”.
Panel Switch Sensitivity
Adjusts the sensitivity of the front panel button
(ATT button, etc.)
High
: Sets sensitivity to high.
Middle (Default)
: Sets sensitivity to middle.
Low
: Sets sensitivity to low.
Steering Remote Controller
Sets the desired function in the steering remote
controller. See
Learning function of steering
remote (P.71)
.
Language setup
1
Touch [SET] of [Language] in the User
Interface screen.
Language Setting screen appears.
2
Set each item as follows.
Select Mode
Selects the mode to select a language.
Easy (Default)
: Selects a language easily.
Advanced : Allows you to select languages for
respective items.*
Language Select
Selects a language.
* If you select [Advanced] for Select Mode,
the following screen appears.
GUI Language Select :
Selects the display language used for the
control screen and so forth.
Navigation Language Select
:
Selects the language used for navigation.
Text Language Select
:
Selects the language used for tag text (song
information).
3
Touch [Enter].
NOTE
• To cancel the language setup, touch [Cancel].