Kenwood DNX5380, Instruction Manual

Page: 45 / 107

44 44
Return to the Top page
Radio, TV
Radio Basic Operation
Most functions can be controlled from the source control screen.
NOTE
• Set the remote controller mode switch to AUD mode before starting operation, see
Switching the operation
mode (P.89)
.
2
1
3 3 4 4 5 8
6
2
7
Simple Control screen List Control screen
1 PS name display
Displays the PS name.
2 Information display/Control switching area
Displays the following information.
•
[FM1], [AM], [MW], etc.
: Band display
•
Preset #
: Preset number
• MHz/kHz : Frequency display
Touch to switch between the Simple Control and List Control screen.
3 Multi function key
Touch to switch the multi function menu. For details on the menu, see
Multi function menu (P.45)
.
4 Preset key/Multi function menu
Recalls the memorized station or channel. When touched for 2 seconds, stores the current receiving
station or channel in memory.
When switched, various functions can be performed by using keys in this area.
For details on the menu, see
Multi function menu (P.45)
.
5 Sub function key
Touch to display “Sub function menu” (7 in this table).
6 Preset list
Displays the list of preset stations or channels and the information.
R
adio And TV Operation