CONNECTION/INSTALLATION
CONNECTION/INSTALLATION
Connection
❏
Connecting wires to terminals for DDX4017BT/DDX417BT/DDX417BTM
FRONT VIEW CAMERA
ENGLISH
67
See page 72.
10 A fuse
Ignition key switch
Fuse box
Battery
Connect to the vehicle’s reverse lamp harness when
using the optional rear view camera.
Connect to the vehicle’s
parking brake detection switch
harness.
• For best safety, be sure to
connect the parking sensor.
To the power control terminal when using the optional power amplifier.
(Or)
To the control terminal of the motor antenna or to the power terminal for the
booster amplifier of film-type antenna.
Not used.
To the remote adapter (not supplied) which is compatible with your car.
To car light control switch.
To car chassis
Purple with white stripe (Reverse sensor wire)
Light green (Parking sensor wire)
1
White
ª
/ White with black stripe
·
:
To front speaker (left)
Gray
ª
/ Gray with black stripe
·
:
To front speaker (right)
Green
ª
/ Green with black stripe
·
:
To rear speaker (left)
Purple
ª
/ Purple with black stripe
·
:
To rear speaker (right)
Blue with white stripe (Power control wire/Antenna control wire) (12 V
350 mA)
Brown (Mute control wire)
Light blue with yellow stripe (Steering remote control wire)
Orange with white stripe (Dimmer control wire)
Red (Ignition wire)
Yellow (Battery wire)
Black (Ground wire)
See page 71.
See page 71.
See page 71.
See page 71.
*
USB terminal (1.0 m): See page 70.
*
If no connections are made, do not let the cable come out from the
tab.
3
Connect the antenna cord
to the antenna terminal.
2017DDX-Entry̲M.indb 67
2017DDX-Entry̲M.indb 67
2016/12/22 14:56
2016/12/22 14:56
