ENGLISH
59
SETTINGS
SETTINGS
❏
<Audio> setting screen
<Equalizer>
Change the sound mode or adjust and store the
equalization for each source. (Page 50)
•
Equalizer
: Selects the preset sound mode.
–
Natural
(Initial)
/Rock/Pops/Easy/Top40/Jazz/
Powerful/User
•
Q factor
: Adjusts the width of the frequency.
–
1.35
/
1.5
(Initial)/
2.0
•
Bass EXT
: Activates/deactivates bass.
–
ON
/
OFF
(Initial)
•
SW LEVEL
: Adjusts the subwoofer level.
–
–50
to
+10
(Initial:
0
)
<Sound Effect>
Adjust the sound effect.
•
Loudness
: Adjusts loudness.
–
OFF
(Initial)/
Low/High
•
Bass Boost
: Selects the bass boost level.
–
OFF
(Initial)/
Level 1
/
Level 2
/
Level 3
/
Level 4
/
Level 5
•
Drive Equalizer
: You can reduce the driving noise
by raising the bandwidth.
–
OFF
(Initial)/
ON
•
Space Enhancer
*
1
: Virtually enhances the sound
space using the Digital Signal Processor (DSP)
system. Select the enhance level.
–
OFF
(Initial)/
Small
/
Medium
/
Large
•
Supreme
*
2
: Restores the sound lost due to audio
compression to a realistic sound.
–
OFF
/
ON
(Initial)
•
Realizer
: Virtually makes the sound more realistic
using the Digital Signal Processor (DSP) system.
Select the sound level.
–
OFF
(Initial)/
Level 1
/
Level 2
/
Level 3
•
Stage EQ
: You can move the center of the sound
to the lower or higher point. Select the height.
–
OFF
(Initial)/
Low
/
Middle
/
High
<Fader/Balance>
Fader
: Adjusts the front and rear speaker output
balance.
•
F15
to
R15
(Initial:
0
)
– When using a two-speaker system, set the fader
to the center (
0
).
Balance
: Adjusts the left and right speaker output
balance.
•
L15
to
R15
(Initial:
0
)
Press [
J
]/[
K
]/[
H
]/[
I
] or drag [
] to adjust.
• To clear the adjustment, press
[Center]
.
<Speaker/X’over>
Select the car type/speaker size and adjust the
crossover frequency. (Page 51)
<Time Alignment>
Select the listening position, then adjust the delay
time of the speaker output to create a more suitable
environment for your vehicle. (Page 52)
<Volume Offset>
Adjust and store the auto-adjustment volume level
for each source. (For discs, the adjustment is stored
for each of the following categories: DVD/VCD, CD,
and DivX/MPEG1/MPEG2/MP3/WMA/WAV/AAC/
FLAC.) The volume level will automatically increase
or decrease when you change the source.
•
–15
to
+6
(Initial:
00
)
*
1
You cannot change the setting when
“Radio”
is selected as the
source.
*
2
This function works only when
“DISC”/“USB”/“iPod”/
“Android™”
is selected as the source.
2017DDX-Entry̲M.indb 59
2017DDX-Entry̲M.indb 59
2016/12/22 14:56
2016/12/22 14:56
