Setting a button to act as a sustain pedal
This is most useful if this button is then assigned to an external switch pedal.
Select ‘Edit PB On Name’– screen reads
EDIT`PB`ON`NAME
Use the
Data Wheel
to select a button and give the button a name in the usual way (eg:‘Sustain On’)
Hold
[SHIFT]
and press
[STORE]
– this takes you directly to:
``Header`Data
Minimum`Level``0
Press the
[––>]
button twice – screen reads:
`Header`Data
`Button`ON`only
Use the
Data Wheel
to select ‘Button On + Off’
Button On + Off
Press the
[––>]
button – screen reads:
````Command
``End`of`Data
Use the
Data Wheel
to select:
```Controller
Press the
[––>]
button – screen reads:
0``Bank`Select
Use the
Data Wheel
to select:
64`Sustain`Pedal
Press the
[––>]
button – screen reads:
Controller`Value
Data`Val`00h```0
Use the
Data Wheel
to select:
Data`Val`7Fh`127
Press the
[STORE]
key to save your data:
UPDATING`MEMORY
Use the
Data Wheel
to select:
Edit PB Off Name
Use the
Data Wheel
to select the same button as before and edit the name in the usual way (eg:‘Sustain Off’)
Hold
[SHIFT]
and press
[STORE]
– this takes you directly to:
``Header``Data
Minimum`Levl```0
Press the
[––>]
button twice – screen reads
Header`Data
Button`ON`only
Use the
Data Wheel
to select:
Button`On`+`Off
Press the
[––>]
button – screen reads:
````Command
``End`of`Data
Use the
Data Wheel
to select:
```Controller
Press the
[––>]
button – screen reads:
0``Bank`Select
Use the
Data Wheel
to select:
64`Sustain`Pedal
Press the
[––>]
button – screen reads
Controller`Value
Leave this setting as it is
Data`Val`00h```0
Press the
[STORE]
key to save your data
UPDATING`MEMORY
EXTERNAL INPUTS 1 & 2
CONTROL FREAK
36
