KENT Nordco KF3BM, Owner'S Manual

Page: 7 / 36

NOV/2005 Section A – Page #3
SAFETY PRECAUTIONS
Before installation or operation of the hydraulic hammer, the operator and maintenance
personnel should read and understand the following safety precautions:
•
The safety alert symbol
!
means ATTENTION! Your safety is involved!!
•
No bystanders are allowed in the vicinity of the hammer while it is in use.
•
Stay clear of the hammer while it is in operation. Flying objects can cause severe injuries, or
even death.
•
Always wear safety glasses and ear protection when operating the hammer.
•
Always wear safety glasses during installation, service or any activities associated with the
hammer.
•
Operate the hammer only when the operator is seated with full control of the machine.
•
Use the hammer for its intended purpose only.
•
When installing or removing the hammer, keep hands and fingers clear of the mounting pin
holes and linkage.
•
Make frequent inspections of the hammer and base machine as described in the "Daily
Inspection" section of this manual.
•
Do not make any alterations to the hammer without the authorization of Kent's Product Support
Department.
•
Anytime service is performed on the hammer, hydraulic pressure in the line must first be
released. Then disconnect the hydraulic lines themselves.
•
Never disassemble the hammer without first releasing the gas charges. Failure to comply can
result in serious injuries or death.
•
Use only Kent/Nordco replacement parts.
•
Never use hands to search for hydraulic fluid leaks, use a piece of paper or cardboard.
Escaping fluid under pressure can be invisible and can penetrate the skin and cause a
serious injury. If any fluid is injected into your skin, see a doctor immediately. Injected
fluid MUST be surgically removed by a doctor familiar with this type of injury or
gangrene may result.