KENT Nordco KF3BM, Owner'S Manual

Page: 17 / 36

NOV/2005 Section B – Page #7
Disassembly Procedures (Continued):
8.
Wash the accumulator body and cover in solvent.
9.
Inspect the inside of the accumulator cover and body for burrs or nicks. If burrs
are found, they can be removed by using 600 grit or finer paper. If nicks are
found, replace the part.
If nicks or burrs are left inside the accumulator, damage to the diaphragm will
occur during charging procedures.
10. Clean the face of the accumulator. (where it mates to the back head of the
hammer).