KENT Nordco KF3BM, Owner'S Manual

Page: 13 / 36

NOV/2005 Section B – Page #3
Accumulator Disassembly/Assembly:
Before you attempt to disassemble the accumulator, you should become familiar with the
components of the accumulator. They are as follows:
General Note: When disassembling the accumulator, inspect all parts for wear and replace
as necessary before reassembly.
Tools required for this procedure:
Adjustable or 22mm wrench
5mm Hex key (allen wrench)
14mm Hex key (allen wrench)
4# hammer
vise
600 or finer grit paper
Anti-Seizing Agent (for reassembly)
Spanner wrench (for accumulator disassembly and reassembly)