9 GRINDING APPLICATION
9-4
9.2.2
Infeed method
The grinding method is firstly, workpiece is sent from two sides or top of two
grinding wheels into the required position, then, move regulating wheel forward to
grind which is a kind of radial feed method, suitable for complicated conical
workpiece machining. To ensure operators’ safety in inserting workpiece,
commonly workpiece is placed on the grinding position by machine, and operators
only putworkpiece to the convey device. Besides, the work processof now
commonly operated, such as insert, take out, metering grinding wheel and
correction of regulating wheel, compensation to worn grinding wheel, the auto
machines and tools are employed including conical roller, roller,
enginevevalve,spinder, crank shaft and rear accelerating box etc.
9.2.3
Endfeed method
Make 2 grinding to be cone shap. Ensure grinding wheels and workrest are fixed
and insert workpiecefron grinding wheel side untio touches stopper. This grinidng
method is only fit cone surface machining.
9.2.4
Tangential feed method
Maintain the backlash of grinding wheel and regulating wheel and push the
workpiece forward according to grinding wheel cutting line.
Property
of
Kent
Industrial
USA
Do
Not
Reproduce
