1 SAFETY TIPS
1-4
10) Clean worktable.
11) Apply lubricator on sliders and cover to prevent dust.
1.4
Tips for electrical equipments
Please notice below tips before maintainance and inspection.
1.
Do not hit controller and pressure control board.
2.
Please use appointed wires specification which listed on manual. Wires
length shouldn’t be to long. If wires drag on floor, it must be covered up.
3.
Do not change pressure control board or any other buttons without authority.
4.
Do not over load the socket and connector.
5.
Turn off main power before changing thefuse or any electrial parts.
6.
Turn off NC controller, pressure control board and mainpower and lock at off
position while checking electrical equipment to avoid people turn on.
7.
Do not use any wet tools to touch electrical equipment.
8.
Please use proper and indicated fuse and never use high volume fuse or
cooper.
9.
Open cabinet shortly to prevent sun light damage.
10. Check electrical circuit screws periodically especially higher current like
NFB, MS, Motors…etc., see if any loosen there to avoid mal-function or
shorted.
Property
of
Kent
Industrial
USA
Do
Not
Reproduce
