![background image](http://html.mh-extra.com/html/kensington/v18p01bp25eu/v18p01bp25eu_instruction-manual_664426015.webp)
MAINTENANCE
Cleaning the brush
1. The frequency that the brush should be cleaned will depend on
appliance usage. Always stop the vacuum and clean the brush head if
the indicators turn white or if the floor head brush stops rotating.
2. Remove the floor head from the cleaner (fig. 19).
3. Push the small lever at the side of the brush in the direction of the
front of the floor head and lift off the retaining plate (fig. 20).
4. Lift out the roller brush (fig. 21) and remove any thread, fluff or other
obstructions. The brush roller can also be washed under running
water if needed. Allow to fully dry.
5. Refit the bush roller and secure into position by fitting the retaining
plate.
Fig. 19
Fig. 20
Fig. 21
Lever
Retaining plate
14