![background image](http://html.mh-extra.com/html/kensington/v18p01bp25eu/v18p01bp25eu_instruction-manual_664426006.webp)
Operation
5
1
2
Charging the Vacuum
This
vacuum
uses a rechargeable 25.2V Lithium battery
. We recommend
to
fully
charge
before using for the first time. It takes
3
-
5
hours
.
1. Place the body of the cleaner onto a flat surface either a table or fit
into the wall bracket.
Fig. 1
Fig. 2
2.
Insert the adaptor cord into the DC jack at the end of the cleaner
handle and plug the adaptor into the mains supply socket (fig.1).
3.
The light indicator show
s
the status (Fig 2):
Charging: Light 1 flash, light 2 off
Half charged: Light 1 on, light 2 flash
Fully charged: Light 1 & 2 on, then off in 10 mins
Low battery: Light 1 flash, light 2 off
Notes
•
Light indicator 1(Fig 2) will flash when the battery is running low
and needs to be recharged, If recharge
is
not
commenced
, the
vacuum
will power off.
•
Only charge or recharge the vacuum indoors.
•
Do not recharge the battery when the air temperature is below
0°C or above 37°C.
•
Batteries become hot after heavy use and will become difficult to
charge. Allow to cool
after use
and wait about an hour between
recharges.