![background image](http://html.mh-extra.com/html/kensington/v18p01bp25eu/v18p01bp25eu_instruction-manual_664426007.webp)
Operation
Assembling your vacuum
Bringing it all together
Safety
Tools
required
•
Before drilling into wall surface, check for hidden cables or
pipes.
•
Wear safety goggles and dust mask when drilling.
•
The use of a residual current device (RCD) is recommended
when working with power tools.
•
Drill fitted with a 6mm masonry drill bit
•
Screwdriver
•
Pencil
•
Ruler
•
Spirit level
1.
Choose a suitable location for the wall bracket away from areas where
it will get wet or knocked and close to a socket
outlet
. Check that the
charge
cable will reach the mains socket (180cm distance max)
and that
there is sufficient space above and below the bracket
(approx.125cm below) for the fully assembled vacuum cleaner
to
be
inserted. No part of the vacuum cleaner should touch the floor
when
fitted into the bracket (fig 6).
Fig. 4
Fig. 5
Fig. 6
6