![background image](http://html.mh-extra.com/html/kensington/ks-sal-20/ks-sal-20_user-manual_664415003.webp)
User Manual
KS-SAL-20 |Pocket
Salinity Tester
Kensington Scientific
22a Cavan Rd, Dry Creek
South Australia, 5094
[email protected]
www.kensingtonscientific.com.au
SETTING OF DEFULAT PARAMETERS
1. Press the CAL button to enter setup menu. The first display should be the default number of calibration points.
2. Press the CAL key again to change the default calibration point, selecting 1, 2 or 3 points. Press the ENTER key
to confirm.
3. The tester will now automatically display the temperature unit selection mode. The display should show °C/UNIT
6. Press CAL to the select the chosen temperature unit (°C or °F). Press ENTER to confirm.
7. The next display will show the temperature calibration mode. The display sho
uld show ‘°C/CAL’.
8. If you do not wish to conduct temperature calibration, press ENTER to proceed with the next option. If temperature
calibration is needed, press CAL key to begin calibration. The display should show the current temperature reading.
8. Press the CAL key to set the desired temperature value. Press ENTER to confirm.