User Manual
KS-SAL-20 |Pocket
Salinity Tester
Kensington Scientific
22a Cavan Rd, Dry Creek
South Australia, 5094
[email protected]
www.kensingtonscientific.com.au
1. Press to confirm calibration or chosen option
2. Toggles between conductivity, TDS and salinity measurement modes.
DISPLAY
The KS-SAL-20 is built with a clear LCD display that shows the measured value, various mode indicators and units.
Below is a summary to describe the meaning behind each notification on the display.
Indicator
Description
MEAS
Indicates tester is in the measurement mode
CAL
Indicates tester is in calibration mode
SETUP
Indicates tester is in SETUP mode
HOLD
Indicates the HOLD function is active and the current displayed value is on hold.
ATC
Indicates temperature compensation is enabled
SETUP MENU
The KS-SAL-2
0 contains integrated setup menu that allows you to customize your tester’s features to fit your
measurement requirements.
Parameter
Description
Options
Description
CAL
Calibration Points
1 (Default)
1 point calibration
2
2 points calibration
3
3 points calibration
UNIT
Temperature Unit
°C (Default)
Celsius
°F
Fahrenheit
°C
Temperature calibration
CAL
Temperature calibration
mode
HOLD
Auto-Hold
YES
Automatically freezes
stable readings
NO (Default)
Disable
OFF
Auto-off
YES (Default)
Automatically turns off
tester after 8 seconds of
idle
NO
Disable
RST
Reset
YES
Restores factory settings
NO (Default)
Disable