manualshive.com logo in svg

Kenmore 795.583*.410, Service Manual

Share
Download
Kenmore 795.583*.410 Service Manual Download Page 44

2. Faults

2-1. Power

Problems

Causes

Checks

Measures

Remarks

No power on

- Power cord cut.

- Check the voltage with tester

.

-Replace the components.

outlet.

- Faulty connector insertion.

- Check visually

.

-Reconnect the connecting parts.

- Faulty connection between plug

- Check visually

.

-Reconnect the connecting parts.

and adapter

.

Fuse blows out.

- Short circuit by wrong connection.

- Check the fuse with tester

- Find and remove the cause of

- Replace with ra

ted

- Low voltage products are

or visually

.

problem (ex. short, high voltage,

fuse after confirming

connected to high voltage.

- Check the input volt are with tester

low voltage).

its specification.

- Short circuit by insects.

(between power cord and products).

- Replace with rated fuse.

- Electricity leakage.

- Check the resistance of power cord

If fuse blowns out

- High voltage.

with tester (if it is 0

, it is shorted).

frequently

, confirm

- Short circuit of components

the cause and prevent.

(tracking due to moisture and dust

penetration).

44

Summary of Contents for 795.583*.410






































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands