manualshive.com logo in svg

Kenmore 795.583*.410, Service Manual

Share
Download
Kenmore 795.583*.410 Service Manual Download Page 34

1. TroubleShooting

CLAIMS.

CAUSES AND CHECK POINTS.

HOW TO CHECK

1. Faulty start

1) No power at outlet.
2) No power on cord.

3) Shorted  start circuit.

4) During defrost.

* Measuring instrument:

Multi tester

Check the voltage.
If the voltage is within ±85%
of the rated voltage, it is OK.

Check the terminal
movement.

Check both terminals of

power cord.
Power conducts:OK.
No power conducts:NG

Check rating of OLP
Temp. 140°C
If rating different: change it
If not: OK

Bad connection between adapter and outlet. (faulty adapter)

The  Inner diameter of adapter.
The distance between holes.
The distance between terminals.
The thickness of terminal.

Bad connection between plug  and adapter (faulty plug).

The distance between pins.
Pin outer diameter.

No power on
power cord.

PTC is off.

No electric power on compressor. - Faulty compressor.

Faulty OLP

Disconnected copper wire.

Internal electrical short.

Faulty terminal contact.

Disconnected.

Capacity of PTC is small.

Characteristics of PTC is wrong.

Bad connection.

Weak connection.
Short inserted cord length.
Worn out tool blade.

Loose contact.
- Large distance between

male terminal.

- Thin female terminal.

Terminal disconnected.

Bad sleeve assembly.

Power cord is disconnected.

Faulty soldering.

Start automatic defrost.
Cycle was set at defrost when the refrigerator
was produced.

Power does not conduct. - Damage.

Characteristics of OLP is wrong

Bad connection with
compressor.

Bad terminal connection.

Too loose.
Assembly is not possible.

8. TROUBLEDIAGNOSIS

34

Summary of Contents for 795.583*.410






































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands