10
7
8
Control Panel and Firebox Support
Stand cart upright.
In front, fit control panel between left and right legs. Insert #10-24x2’’ machine screws to hold panel in place. Place upper
firebox supports onto screws making sure angle side is facing the front and attach with # 10-24 flange nuts. See the insert
for correct placement.
In back, attach upper firebox support with #10-24x2’’ machine screws and # 10-24 flange nuts.
#10-24x2”
Machine Screw
Qty.8
#10-24
Flange Nut
Qty. 8
Valve/Hose/Regulator and Ignitor
Attach valve/hose/regulator assembly to control panel using #10-24x1/2’’ machine screws.
Remove ignitor cap and plastic hex nut from Electronic Ignition Module assembly. Insert module into the opening on
control panel and attach with the removed hex nut. Place AAA battery into module slot with positive end (+) facing
outward. Screw ignitor cap onto module.
#10-24x1/2”
Machine Screw
Qty.2
#10-24x2”
Machine Screw
Control panel
Left firebox
support
Right firebox
support
16 • 464722309 • 464722509
NOTE:
Angle Edge
Valve/ Hose/ Regulator
Assembly
#10-24x1/2”
Machine Screw
Button
AAA Battery
Hex Nut
Electronic Ignition Module
