3
#10-24x2”
Machine Screw
Qty.8
#10-24
Flange Nut
Qty. 8
2’’ Hinge Pin
Qty.2
Upper and lower Front Panel and Top brace
Lay front legs down on the floor. Fit upper front panel between legs. Attach with 2’’ hinge pins and hitch pins through the
3rd hole down from the top of the leg, and the bottom hole of the top front panel.
Attach lower front panel with #10-24x2’’ machine screws and #10-24 flange nuts through the 2 lowest holes on the legs.
Attach top brace with #10-24x2’’ machine screws and #10-24 flange nuts through the 2 bottom holes of the upper leg.
4
Right leg
assembly
Left leg
assembly
#10-24x2”
Machine Screw
#10-24x2”
Machine Screw
2’’ Hinge Pin
Hitch Pin
Top brace
Lower Front Panel
Hitch Pin
Qty. 2
Upper front panel
14 • 464722309 • 464722509
Back Brace to Cart
Remove previously attached screws and nuts securing the upper leg and side brace as noted below. Attach upper and lower back
braces with
#10-24x1-1/4" screws
and
#10-24 flange nuts.
#10-24x1-1/4’’
Machine Screw
Qty.7
(One re-used)
#10-24x1-1/4’’
Machine Screw
#10-24
Flange Nut
Qty. 7
(One re-used)
#10-24
Flange Nut
Side Brace
Back Brace
Back Brace
Note:
Remove previously installed
screw and nut from location
shown to attach upper back brace.
Hitch Pin