Kenmore 415.16505900 Use And Care Manual Download Page 13

Page: 13 / 28

ASSEMBLY

Hitch Pin

Qty.2

Hinge Pin

Qty.2

#10-24x1-1/4’’

Machine Screw

Qty.2

#10-24

Flange Nut

Qty. 2

Left Front Leg

(Curve)

Suppor

t Bracket

Left Back Leg

(Straight)

Side Brac

Upper Leg

Hinge Pin

Hitch Pin

Left Leg

‘

Place one upper leg as shown

NOTE: Left front and left back legs do not have leg extenders. In front, attach upper leg, side

brace and left front leg (curve) with

#10-24x1-1/4" screw

and

#10-24 flange nut. Tighten screws.

In back, attach upper leg, side

brace and left back leg (straight) with

#10-24x1-1/4" screw

and

#10-24 flange nut. Do not tighten.

‘

Attach support bracket in second hole from bottom of leg with hinge pins and hitch pins

(A).

#10-24x1-1/4’’

Machine Screw

Qty.3

#10-24

Flange Nut

Qty. 3

Upper L

Right Front Leg

(Curve)

Right Back Leg

(Straight)

Support Bra

cket

Leg Extender

464722309 • 464722509 • 13

Right Leg

‘

Place other upper leg as shown

Attach upper leg and right front leg (curve) with

#10-24x1-1/4" screw

and

#10-24 flange nut.

Tighten screws.

‘

Attach support bracket with

#10-24x1-1/4" screws

and

#10-24 flange nuts.

Summary of Contents for 415.16505900





























Search results

Summary of Contents for 415.16505900

Reviews:

Related manuals for 415.16505900

Brands by name

Popular brands

Kenmore 415.16505900, Use And Care Manual

Search results

Summary of Contents for 415.16505900

Reviews:

Related manuals for 415.16505900

Brands by name

Popular brands