KEM TRICOR TCE80 -E Series, Manual

Page: 59 / 98

Manual Operation
59
4.5.6.5 RESET KEY menu
In the submenu “KEY-RESET” the pushbutton “Reset” can be enabled or disabled.
If the pushbutton Reset is active, it can be used to reset the batch counter.
PARAMETER MENU
RESET KEY
UP DOWN EXIT
P 
SELECT RES.KEY MODE
RES. KEY OFF
UP DOWN EXIT
Use the keys “UP” and “DOWN” to enable or disable the key and confirm with “P” or skip with “E”.
The display returns to the setup menu
4.5.6.6 FLOW DIRECTION menu
In the submenu “FLOW-DIREC” the positive direction of the flow can be set.
If flow direction is “forward” (default setting), a flow through the meter in direction of the arrow on the meter will be
displayed positive, the opposite flow negative.
If for technical reasons the meter must be mounted in that way, that the normal flow is against the direction of the
arrow, the sign of the flow can be inverted by setting flow direction to “reverse”.
PARAMETER MENU
FLOW-DIREC
UP DOWN EXIT
P 
FLOW-DIRECTION
FORWARD
UP DOWN EXIT
Use the keys “UP” and “DOWN” to select the positive flow direction and confirm with “P” or skip with “E”.
The display returns to the setup menu
4.5.6.7 K-FACTOR menu
In the submenu “K-FACTOR” the k- factor for fine tuning of the flow calculation can be set.
Ex work the unit is calibrated with a k- factor of “1”. If for any reasons the flow measured by the mass flow meter
differs slightly from a flow measured with other means, the value calculated by the TCM8000 can be adjusted by
changing the k- factor.
PARAMETER MENU
K-FACTOR
UP DOWN EXIT
P 
K-FACTOR
1.00000
RIGHT UP EXIT
Use the keys “RIGHT” and “UP” to select the desired value and confirm with “P” or skip with “EXIT”.
The display returns to the setup parameter menu.