Kelvion KBloc Operating Instructions Manual Download Page 77

Page: 77 / 104

Chapter 7

Maintenance

K°Bloc – Fully welded plate heat exchangers - English Version 2.2 - 01.2016

7.3 REMOVING THE BAFFLE PLATE BRACKET

Safety instructions: Danger of damage to the plate pack and/or the baffle plate

bracket with baffle plates!

Mechanical forces resulting from removing the baffle plate bracket may
damage the plate pack, the baffle plate bracket and/or the baffle plates.

•

For removing, never use conventional tools made of carbon steel!

•

Always use tools made of austenitic materials or plastic!

•

The plate pack is sensitive to mechanical forces of any kind. Improper
handling will cause damage and impaired function.

Cleaning the plate pack generally does not require removing the baffle plate
bracket. Inspecting the plate pack weld seams hidden by the baffle plate
brackets may require removing the baffle plate bracket.

Baffle plate bracket of K°Bloc

Summary of Contents for KBloc








































































































Search results

Summary of Contents for KBloc

Reviews:

Related manuals for KBloc

Brands by name

Popular brands

Kelvion KBloc, Operating Instructions Manual

Search results

Summary of Contents for KBloc

Reviews:

Related manuals for KBloc

Brands by name

Popular brands