K°Bloc – Fully welded plate heat exchangers - English Version 2.2 - 01.2016
32
Fastening a vertical-type K°Bloc delivered in upright position properly
WARNING
Danger of injury by heavy weight of K°Bloc!
The K°Bloc may slip off and fall down during transport when incorrectly
fastened. You may suffer serious injuries and bruises in such an accident.
Never stand underneath suspended loads!
Always use approved load holding devices with sufficient load-carrying
capacity!
Always use approved lifting equipment with sufficient load-carrying capa-
city!
Wear safety shoes at all times!
Lift and lower the K°Bloc evenly and slowly. Transport the unit vertically
at all times!
Never transport the K°Bloc at the threaded bolts!
Fasten the load holding devices only at the marked fastening points for
transporting the K°Bloc!
Never attach the lifting slings to the connections!
Avoid any pendulum movements of the K°Bloc!
Carry out the following steps:
1.
Fit the following shackles:
one shackle at the transport lifting eye for the vertical K°Bloc of the
"single eye" version;
two shackles at the two transport lifting eyes for the vertical K°Bloc of
the "double eye" version;
two shackles at two opposite transport lifting eyes for the vertical
K°Bloc of the "crosswise double eye" version.
