background image

4

Table of contents >>

 

PERSONAL PROTECTION

Always use suitable protection equipment. Do not wear loose cloth-

ing or jewellery while working with the equipment. Long hair should 

be tied up when working with machine that has moving parts. Use 

protective gloves as there is a risk of burns if any hot surfaces are 

touched.

Kellfri disclaim any responsibility for self-made modifications, changes or alterations.

SAFETY INSTRUCTIONS

Before using the trailer, and for the safety of yourself and others, you must read the safety 

instructions and operating instructions and understand their contents. Always make the safe-

ty instructions and the operating instructions easily accessible to users of the equipment or 

product. It is a good idea to read the safety instructions from time to time, both for your own 

safety and that of others. It is important that the user understands that common sense and 

general caution are not built into the product, but must be supplied by the user.

If the operating instructions gets damaged or in any other way cannot be used, please contact 

and order a new one from: Your retailer or   download from manual.kellfri.co.uk

Do not use the equipment or product if you feel ill, tired or are under the influence of alcohol. 

Do not use the equipment or product if you are taking prescribed medication or drugs, or 

suffering from severe depression or mental illness. Always comply with general rules of the 

road and applicable rules stipulated by the Animal Welfare Act. People under the age of 15 and 

those suffering from mental illness are not allowed to use the equipment.

Warning! 

The original design of the product must not, under any circumstances, be mod-

ified without the approval of the manufacturer. Unauthorised modifications 

and/or accessories may cause life-threatening injuries or death to users and 

others.

INCASE OF EMERGENCIES

In case of an emergency please dial 112.

Keep cell phone or emergency phone available specially when working alone. First aid kit and

fire extinguishers must be kept easily accesable during all work, maintenance and service.

Summary of Contents for 35-SKL145

























Reviews: