KPCI-3101 — KPCI-3104 Series User’s Manual
•
If all three of the following apply, then assume that you do not need to repeat the analog
output software test. However, by process of elimination, you failed the digital I/O soft-
ware test the last time you tried. Go to step 5 and repeat the digital I/O software test.
–
Your board has analog outputs.
–
You have done the analog output software test at least once.
–
Your software passed the analog output software test the last time you tried.
•
If your board does not have analog outputs then by process of elimination, you failed the
digital I/O software test the last time you tried. Go to step 5 and repeat the digital I/O
software test.
13. You arrived at this point from step 8, because presumably you have a commercial or other-
wise unmodifiable applications program that is assumed to be proven. Contact the maker of
your software to determine whether you have a version designed to work with the
KPCI-311–4 version of DriverLINX. For example, not all versions of TestPoint will work
with KPCI-3101–4 DriverLINX. Also, check whether the program is installed correctly.
14. Select your next step in Scheme C based on the criteria given in the following alternatives:
•
If you are certain at this point that your application program is the correct version AND is
properly installed, then the cause of your problem may be outside the scope of these
diagnostics. Read the instructions in
Keithley for help in isolating the cause of your problem. Also, contact Keithley if you
have been unable to find out elsewhere whether you have the correct version of software.
•
If you are uncertain at this point that your application program is properly installed, then
reinstall it now. When you are satisfied that it is properly installed, go to step 11 and retry
selected I/O software tests.
Problem isolation Scheme D: expansion slot connectors
In Scheme D, you further check and try to remedy apparent expansion slot malfunctions.
NOTE
This is not a stand-alone procedure. Use it only when it is called for by
another procedure.
1. Remove computer power again, and install a KPCI-3101–4 board that you know is func-
tional. Do not make any I/O connections.
2. Turn computer power on and check operation with the functional board in place. This test
checks the computer accessory slot. If you were using more than one board when the prob-
lem occurred, use the functional board to also test the other slot.
3. If the accessory slots are functional, use the functional board to check the I/O connections.
Reconnect and check the operation of the I/O connections, one at a time.
4. If operation fails for an I/O connection, check the individual inputs one at a time for shorts
and opens.
5. If operation remains normal to this point, the problem is in the KPCI-3101–4 board(s) origi-
nally in the computer. If you were using more than one board, try each board one at a time in
the computer to determine which is faulty.
Summary of Contents for KPCI-3101 Series
