Keithley KPCI-3101 Series, User Manual

Page: 105 / 146

KPCI-3101 — KPCI-3104 Series User’s Manual Specifications A-11
Clocks
Internal Clock Support Yes Yes Yes
External Clock Support Yes Yes
Number of Extra Clocks 0 0 0 0 0
Base Clock Frequency 20MHz 0 0 0 20MHz
Maximum External Clock Divider 1.0 1.0 1.0 1.0 65536
Minimum External Clock Divider 1.0 1.0 1.0 1.0 2.0
Maximum Throughput 3MHz
11
1.0Hz 0 0 10MHz
12
Minimum Throughput 1.2Hz 1.0Hz 0 0 0.005Hz
13
Counter/T
imers
Cascading Support Yes
Event Count Mode Support Yes
Generate Rate Mode Support Yes
One-Shot Mode Support Yes
Repetitive One-Shot Mode Support Yes
High to Low Output Pulse Support Yes
Low to High Output Pulse Support Yes
None (internal) Gate Type Support Yes
High Level Gate Type Support Yes
14
Low Level Gate Type Support Yes
15
High Edge Gate Type Support Yes
15
Low Edge Gate Type Support Yes
15
Interrupt
Interrupt Support
FIFOs
FIFO in Data Path Support
Software
Calibration
Software Calibration Support Yes Yes
1
D/A subsystems are supported by the KPCI-3102 and KPCI-3104 boards only.
2
The DIN and DOUT subsystems use the same DIO lines.
3
All 16 bits of the DIO lines from Ports A and B are assigned to A/D input channel 16. While the DIN subsystem itself is incapable of continuous operation,
you can perform a continuous DIN operation by specifying channel 16 in the channel-gain list of the A/D subsystem and starting the A/D subsystem.
4
The CGL depth of 1024 entries in conjunction with a multiscan count of 256 provides an effective CGL depth of up to 256K entries.
5
The value of 1.2Hz assumes the minimum number of samples is 1.
6
Channels 0 to 15 are provided for analog input; channel 16 reads all 16 bits from the DIN subsystem (Ports A and B). If the channel-gain list contains
channel 16 only, the board can read the digital input channels at a rate of 3MSamples/s.
7
KPCI-3101, KPCI-3102, KPCI-3103, and KPCI-3104 boards support two input ranges: ±10V and 0 to 10V.
8
KPCI-3102 and KPCI-3104 boards support four output ranges: ±10V, 0 to 10V, ±5V, and 0 to 5V.
Table A-9
KPCI-3101–4 series supported options (cont.)
KPCI-3101–4 Series A/D D/A
1
DIN DOUT C/T
Total Subsystems on Board 1 2 3
2
3
2
4