Keithley DMM6500, Manual

Page: 117 / 123

DMM6500 6½-Digit Multimeter with Scanning Calibration and Adjustment Manual Section 4: TSP command reference
DMM6500-905-01 Rev. E June 2021 4-5
cal.adjust.step.execute()
This function executes the specified adjustment step.
Type TSP-Link accessible Affected by Where saved Default value
Function Yes
Usage
cal.adjust.step.execute(
stepname
)
cal.adjust.step.execute(
stepname, value
)
stepname
The adjustment step to start
value
Value for this adjustment step. If using the default then value is optional
Details
This command generates an error if:
•
Calibration is locked
•
The step does not complete successfully
•
The value that is passed is invalid for the step, out of range, or not needed
Also see
cal.lock() (on page 4-6)
cal.unlock() (on page 4-9)