Keithley 6517A, Getting Started Manual

Page: 38 / 104

Model 6517A Getting Started Manual Measurement Options 2-3
Time, Day, and Date — This display provides the
time, day of week, and the date. The time, date and
format (12-hour or 24-hour) are set from the CLOCK
option of the GENERAL MENU (see main Menu).
6517 ELECTROMETER/HIGH RESISTANCE METER
FILT 4W ARM
Bar Graph — The bar graph is a graphical represen-
tation of the reading with zero at the left end. Each
full segment of the bar represents approximately 4%
of the range limit.
6517 ELECTROMETER/HIGH RESISTANCE METER
FILT 4W ARM
Zero-centered Bar Graph — The zero-centered bar
graph is a graphical representation of the reading
using plus/minus limits with zero in the center. Each
full segment represents 10% of the limit.
6517 ELECTROMETER/HIGH RESISTANCE METER
FILT 4W ARM
Maximum and Minimum — This display shows the
maximum and minimum readings that have occurred
since the display was entered. Maximum and mini-
mum values are reset by pressing the present function
key or by leaving the display.
6517 ELECTROMETER/HIGH RESISTANCE METER
FILT 4W ARM
Relative and Actual — This display is used with the
rel (relative) feature. While the top line shows the
result of the rel operation, the bottom line shows the
actual (raw) reading.
6517 ELECTROMETER/HIGH RESISTANCE METER
FILT ARM REL
Calculated and Actual — This display is used with a
math calculation. While the top line provides the
result of the math calculation, the bottom line pro-
vides the raw reading.
6517 ELECTROMETER/HIGH RESISTANCE METER