Model 6517A Getting Started Manual
Front Panel Operation
1-21
Auto discharge
When enabled, Auto Discharge is used to automatically reset the charge reading to zero
when the specified charge level is reached. After the integrator resets, the charge measure-
ment process simply restarts at zero. Perform the following steps to enable or disable Auto
Discharge.
1.
Press the CONFIG and then Q to display the coulombs configuration menu.
2.
Use the
and
keys to place the cursor (blinking menu item) on AUTO-
DISCHARGE and press ENTER.
3.
Perform step a to enable Auto Discharge or perform step b to disable it:
a.
Enable Auto Discharge — Place the cursor on ON and press ENTER to dis-
play the present discharge level. Use the
and
keys, and the RANGE
and
keys to set a different discharge level and press ENTER.
b.
Disable Auto Discharge — Place the cursor on OFF and press ENTER.
4.
Use the EXIT key to exit from the menu.
Summary of Contents for 6517A
Page 12: ...1 FrontPanelOperation...
Page 36: ...2 MeasurementOptions...
Page 67: ...3 RemoteOperation...
Page 96: ...4 SpecsandAccessories...
