M7i WHEELCHAIR-ACCESSIBLE TOTAL BODY TRAINER
06
To position the M7i at the desired location, carefully tilt the M7i toward the rear until the transport wheels make
contact with the floor and position in a desired location.
NOTE: Carefully remove all parts from the box and check for any damage or missing parts (see “Parts List,”
page 7). If parts are damaged or missing, contact your local dealer, distributor, or Keiser Customer Support by
telephone at 1 559 256 8000.
WEIGHT AND FOOTPRINT
M7i PLACEMENT
UNPACKING
Total Weight
142 lbs (64 kg)
Length 39.4 in (1,000 mm) x Width 28 in (711 mm)
M7i Footprint
ASSEMBLY
36 in (914 mm)
36 in (914 mm)
36 in (914 mm)
36 in (914 mm)
TRAINING AREA
REAR
FRONT
FREE AREA
39.4 in (1,000 mm)
28 in (711 mm)
Figure 1. M7i Training Area
The minimum amount of required free area space around the M7i
is 36 inches (914 mm) on all sides (refer to Figure 1). When M7i
machines are positioned adjacent to each other, the free area may
be shared. Free area space at the rear of the M7i is not required
when the M7i is positioned against a wall.
Follow Steps 1 - 3 below.
1
2
3
5 mm Allen Wrench
TOOL REQUIRED
