M7i WHEELCHAIR-ACCESSIBLE TOTAL BODY TRAINER
16
WARNING: Equipment safety can only be maintained if it is regularly inspected for damage and wear. Immediately
replace damaged, worn, or broken parts and do not use the M7i until all repairs have been completed and
tested by a certified Keiser technician.
MAINTENANCE
PREVENTATIVE MAINTENANCE SCHEDULE
Weekly
•
Check to ensure that the M7i is in safe proper working order:
–
M7i is leveled (refer to page 9, “Leveler” section).
–
Handles operate smoothly, (refer to page 11, “Adjustment Knobs” section).
•
Check that parts most susceptible to wear are not damaged or broken:
–
Handles, Grips, Adjustment Knobs, Recoiler Safety Straps, Footpads, and Foot
Straps.
•
Wipe all areas in the sweat path with a damp soft towel or cloth.
Monthly
•
Clean external surfaces using warm water and a soft cloth, especially around
the areas that come in contact with sweat.
–
Do not use household or industrial cleaners as they can destroy the paint
finish.
–
For deeper cleaning, use only mild dish washing soap, followed by an
automotive treatment such as Meguiar’s
®
* Quik Detailer Mist and Wipe.
Biannually
•
Check to ensure all external visible screws and nuts are not loose and that they
are fastened tight.
•
Check Handles, Recoiler Safety Straps, and Foot Straps and replace if worn.
•
The low battery signal (“LO-BA”) will appear on the computer display when it
is time to replace the batteries (two D batteries per M7i, refer to “Computer
Battery Replacement” on page 17 for complete instructions).
NOTE: For establishments with multiple M7i machines, replacement of all
computer batteries at the same time is recommended.
•
Apply wax to protect the paint finish on metal parts:
1.
Wipe down and thoroughly clean the M7i prior to applying wax.
2.
Use an easily applied automotive treatment such as Meguiar’s
®
* Quik Detailer
Mist and Wipe.
3.
Target areas that come in contact with sweat as they are most vulnerable to
rust.
NOTE: Failure to apply a coat of wax to high-sweat areas at least twice annually
will decrease paint and frame life due to corrosion and will void the warranty.
•
Apply lubricant to the Adjustment Knobs:
1.
Unscrew Adjustment Knobs from the Arm.
2.
Clean threads with a lint-free cloth.
3.
Apply a moderate amount of lubricant to the threads.
NOTE: Both the threaded stud and the threaded insert nut are stainless steel. It
is critical to keep the threads lubricated with a heavy grease (preferably white
or clear in color), such as HYDROTEX
®
* Acculube #2 or any compound with
equivalent anti-wear and corrosion resistant properties.
1st Month
•
Check to ensure all external visible screws and nuts are not loose and that they
are fastened tight.
• Check for broken stitches or parts; torn, cut or frayed material; or locks, buckles,
or hook and loop fasteners that do not hold securely.
Contact Keiser Customer Support for replacement part(s) order, or for any matters regarding the safe operation of
your M7i, by telephone at 1 559 256 8000, online 24/7 at keiser.com/support, or by email at [email protected].
