CHECKING FOR PROPER OPERATION
[ ]
All Parts Correctly Installed
[ ]
Acorn Nuts Torqued At 45 Nm (35 ft-lbs)
[ ]
Pedals Loctited and Torqued To 45 Nm (35 ft-lbs)
[ ]
All Screws and Nuts Properly Torqued and Tightened
[ ]
Handlebar and Seat Adjustments Operate Properly
[ ]
Apply LPS #3 To flange and screws that mount the main frame (C) to the base frame (B)
[ ]
Apply LPS #3 To left bottom bracket bearing (Fig. 40a)
[ ]
Apply LPS #3 To the clip-in portion of the pedals (Fig. 40b)
[ ]
Bike Has Been Polished With Paste or Spray Wax and a Clean Cloth
[ ]
Computer Installed and Calibrated and In Working Order
WARNING
: Failure to follow the below safety information and instructions could result in
personal injury or loss of life. Use this equipment only for its intended use as described in this
manual. Please read all the information provided for safe operation.
!
NOTE:
Since we are always striving to improve our products; our products are
subject to change without notice.
!
a
b
WARNING
: Perform the operations below before riding to make sure the bike is fully
operational. Failing to test a bike prior to normal use will void your warranty and could result
in serious injury.
!
38
39
40
11
