MOUNTING HANDLES AND LINKS
ASSEMBLING FOOT REST
Step 1:
Obtain both Foot Rests (J) and apply some Loctite 242 (N9) to the threads.
Step 2:
Screw and hand tight both Foot Rests into the tapped holes on both sides of the
TBT (Fig. 17 - NEXT PAGE).
13
14
15
16
Step 1:
Obtain the Left (A) or Right (B) Handle, and slide it over the pivot shaft as shown
(Fig. 13).
Step 2:
While holding the Handle, secure the Large Washer (N2) and the Hex Head Cap
Screw (N5) using a ratchet and the 13mm socket. Torque the screw to 23 Nm (17 ft-lbs)
(Fig. 13 & 14).
Step 3:
Align and assemble the Handle to the link as shown (Fig. 15). While holding the
6mm Allen Wrench on the Socket Button Head Cap Screw (N6), Tighten and torque the
Hex Elastic Lock Nut (N4) to 23 Nm (17 ft-lbs) using a 17mm socket and torque wrench.
Step 4:
Insert the Aluminum Cap (O1) into the Handle (Fig. 16). Be careful not to damage
the attached O-Ring.
Step 5:
Repeat Step 2 and Step 4 for the Handle and Link on the other side.
Summary of Contents for m3 TBT
Page 1: ...USER MANUAL ...
