WARNING!
Failing to install the pedals with Loctite 242, or crossing the threads
will damage them, and could result in serious injury to the user.
10
NOTE:
Left pedal is LH threads
and right pedal is RH threads.
Step 2
: With a clean cloth, wipe the
threaded area of the pedals. Apply
Loctite 242 to the pedal threads. Install
the pedals into the crank arms, use the
15mm open-end wrench to tighten.
Finish with the torque wrench, 15mm
crowfoot, and 6” extension. Torque
pedals to 47 Nm (35 ft-lbs) (Fig. 10).
ASSEMBLING PEDAL TO CRANK ARM
Step 1
: Unwrap the pedal set and Loctite 242, obtain the Torque wrench, 15mm
crowfoot, 6” extension, and 15mm open-end wrench.
MOUNTING COMPUTER
Step 1
: Obtain the #2 Phillips screwdriver and remove the computer mounting screw
from the display mount.
Step 2
: Coil the computer cable into the computer mount cavity (Fig. 11).
Step 3:
Slide the computer up into the two locking ears. Insert and secure the screw you
removed in Step 1 using the #2 Phillips screwdriver (Fig. 12).
11
12
Summary of Contents for m3 TBT
Page 1: ...USER MANUAL ...
