Kegel8
®
Ultra Operation Manual
12
A “concealed” lock button is included in the Kegel8
®
Ultra which allows the
clinician to accurately monitor “Home Compliance” of the patent between
appointments. It records the time in use and the average intensity (MA). It also
locks the customised programmes, stopping them from being altered.
You can lock the unit to start measuring the statistics of use and make sure the
programme parameters stays the same. To change or modify the programme,
fi rst unlock the unit. Unlocking will clear the statistics.
To Lock the Unit
1. Select the pre-set or customised programme required. In the case of
a customised programme, make sure that the pulse width, frequency,
time etc. are set-up correctly.
2. Remove the battery cover and, using a thin rod gently press on the
lock button as shown in the diagram on page 6 until you hear a
double beep. The unit is now “locked” and cannot be altered until
“unlocked”. Note: The lock symbol will appear on the LCD when
the unit is “locked”.
To Unlock the Unit
Remove the battery cover and press the concealed switch with a thin rod until
a single beep is heard. Now the LCD will display the average mA used on each
channel and the total hours and minutes the unit has been in use as shown in
the diagram. To return to normal “unlocked” operation, simply press SET.
Lock Button
•Work
•Rest
•Alt
•Cont
•Mod
10 Hz
200 uS
P08
3 : 2
Min
30 20
MA
MA
Lock symbol
(fl ashes when being
unlocked)
Frequency & pulse
width of phase
Programme
Hours and
minutes unit
was used in
the locked
mode
Average millamps
CH.A
Average milliamps for
CH.B
Minutes
Number of phases
Phase mode
Min