Kegel8
®
Ultra Operation Manual
10
9. Hold down the A+ button until you feel a strong but comfortable current.
The current may be decreased by pressing the A- button.
10. You may adjust the strength of the current during the treatment by press-
ing the A+ or A- buttons.
11. To exit the programme before it is fi nished, turn off the unit by pressing
the on/off button once.
12. Important: Do not remove your probe / electrodes while the unit is run-
ning.
13. Carefully clean Vaginal or Rectal electrode before and after use. Wash
the probe gently in mild soapy water, rinse and make sure the probe is
completely dry before returning to storage in the plastic bag.
Low Battery Indicator
When the battery power is low, the low battery indicator will appear on the
screen (shown in the diagram on page 7). When the battery indicator shows
one bar, replace the battery.
Disconnection Indicator
When the probe becomes disconnected or when the lead wires do not conduct
the electrical current, the milliamp level will return to zero and the eff ected
channel will fl ash on and off .
Common Issue:
If you press + button but the intensity stops at 6-9 mA and cuts off to zero
and you see 0 mA fl ashing on the screen:
- This is a typical situation for any muscle stimulator. You are experienc-
ing the safety cut off due to no electrical load on the output. You should
be able to resolve this issue yourself, please folow the troubleshooting
chapter on page 25.