22
any motion that is detected by it will trigger the capture of photos or videos as
programmed in the
SETUP
Menu. Be sure you have read the descriptions of
the Capture Number, Video Length, Interval and Sensor Level parameters.
Please note, the PIR is strongly sensitive to ambient temperature. The greater
the temperature difference between the environment and your subject, the
farther the possible sensing distance. The average sensing distance is about
45 ft.
Before leaving the camera unattended, please check for the following:
• Are the batteries or DC power supply inserted/connected with correct polarity
and is the power level sufficient?
• Does the SD card have sufficient available space and is its write-protection
(lock) switch off?
• Is the Power switch in the
ON
position? (do not leave it in
SETUP)
.
PLAYING BACK/DELETING the PHOTOS/VIDEOS
After you have setup, mounted and activated your
KeepGuard Cam
, you will
of course be eager to return later and review the images it has captured for you.
There are several different ways this can be done.
Reviewing Images on the KeepGuard Cam LCD (Models with Color
Viewer only)
• Put the power switch in
SETUP
mode (switch to
OFF
first).
• Push the
OK (Replay)
key to enter image review mode.
• Use the
UP/DOWN
keys to scroll through your photos or videos. The right
corner of the display will indicate
″JPG″ for still photos, and a film icon for
video files. Press the
RIGHT (Shot)
key to review a video.
• Push
MENU
to delete an image. Image delete mode works as described
below. To exit image review mode, press the
OK
key.
Reviewing Images on an External Video Monitor
A TV monitor can also be used to play back pictures (or videos) from the
device. Connect a TV monitor or a viewing device (such as a digital picture
frame) that has a standard composite video input (RCA jack) to the
KeepGuard Cam
′s ″TV Out″ mini jack using the supplied cable. Then:
