20
Latitude-----
(La)N000,00’00”
Longitude--
(Lo)W000,00’00”
N=North
S=South
Minutes
Seconds
W=West
E=East
Degrees
Longitudes
(3 digits)
Minutes
Seconds
MOUNTING AND POSITIONING the KEEPGUARD CAM
Mounting
After you′ve set up the camera′s parameters to your personal preferences at
home or in your truck, you′re ready to take it outside and slide the power switch
to
″ON″. When setting up the
KeepGuard Cam
for scouting game or other
outdoor applications, you must be sure to mount it in place correctly and
securely. We recommend mounting the
KeepGuard Cam
on a sturdy tree with
a diameter of about 6 in. (15cm). To get the optimal picture quality, the tree
should be about 16-17 ft. (5 meters) away from the place to be monitored, with
the camera placed at a height of 5-6.5 ft. (1.5~2 m). Also, keep in mind that
you will get the best results at night when the subject is within the ideal flash
range, no farther than 45′ (14m) and no closer than 10′ (3m) from the camera.
There are two ways to mount the
KeepGuard Cam
: using the provided
adjustable web belt, or the tripod socket.
Using the adjustable web belt: Fig. 5
illustrates using the web belt on the
KeepGuard Cam
. Push one end of the belt through the two brackets on the
back of the
KeepGuard Cam
. Thread one plastic buckle part onto each end of
the belt. Fasten the belt securely around the tree trunk by clicking the buckle
ends together after tightening the belt so there is no slack left.
Degrees
Latitude
(3 digits)
