19
Password
ON,
OFF
Select "on" to set a password then
input the password. Select "off" to
close the password function.
Default
Cancel
, Execute
Select
″Execute″ and press
OK
to
restore all parameters to the original
factory default settings. If the camera
is behaving oddly and you think you
may have changed the setting for
something accidently (but aren′t sure
which
one),
this
will
reset
all
parameters to their most commonly
used or
“
generic” settings.
Camera Name Input
After selecting the Camera Name parameter (the only setting is “Input”), press
OK. If necessary delete the previous or default name by pressing the RIGHT
key until the backspace
symbol “←” is highlighted then keep pressing OK.
Select (highlight) each alphanumeric character you want using the
LEFT/RIGHT keys and pressing OK after each one to set it. When finished
naming the camera press MENU to save the name to memory.
Coordinate Input
After selecting the Coordinate Input parameter press UP or DOWN to select
the ON setting and press OK. The Latitude and longitude for any location
where you plan to place the camera can be obtained at many websites, for
example:
http://itouchmap.com/latlong.html
. You can enter a nearby street
address, zip code or use the various types of maps to locate the approximate
position. The format you will need to use to enter the coordinates in the
KG780NV menu screen is shown on the next page:
