7
robot. When you turn on the robot, it will take about 40s to start the system before operation. After
you turn off the robot, the machine will be powered off immediately.
Fig. 3 Schematic diagram of power switch position
3.2.2 App Instructions
3.2.2.1 Introduction
The basic disinfection progress: Firstly, the user selects the disinfection mode in the APP.
Secondly, the user selects the destination or the route in the APP. Thirdly, the robot departs to the
destination. Fourthly, Upon arrival at the destination (or route area), the robot will send a voice
prompt, and then conduct continuous disinfection task until it finishes the tasks set by the users;
Lastly, The robot will return to the starting point automatically when it finishes the works.
3.2.2.2 Disinfection Mode
The robot has three disinfection modes:
On-the-way mode: The robot conducts ultrasonic dry mist disinfection along the route.
Fixed-point mode: The robot conducts ultraviolet disinfection for one single room.
Dual mode: The robot conducts dual mode disinfection(ultraviolet disinfection and ultrasonic
dry mist disinfection) at the same time in a room.
Under the on-the-way mode, the user can select one or several routes. Firstly, Press the button
‘Go’ in the screen to start the robot; when the robot arrives to the starting point of the first route, it
