background image

18

4.3 Safety Instructions

4.3.1 Use Restrictions

(1) As a wheeled robot, the product shall only operate in indoor environment with flat ground

(smooth ground; slope:

3°; protrusion height:

0.5cm). Do not operate the robot in outdoor

environment (such as open balcony) or rugged ground (such as stairs).

(2) Do not operate the robot in a suspended environment (e.g. duplex floor, open balcony, top of

house, stairs) or environment without protective fence.

(3) Do not operate the robot in an environment where the temperature is higher than 45

or lower

than 0

or there is liquid or viscous substance on the ground. The disinfectant should meet the

standard GB5749

2006.

(4) Before using the robot, please remove all kinds of wires on the ground in the operating

environment to avoid dragging when the robot is in operation.

(5) Before using the robot, please remove sharp objects on the ground (such as decoration waste,

glass, nails, etc.) to avoid damage to the chassis of the robot.

(6) Do not put anything on the host of the robot not matter when it is still or moving.

(7) Do not push or move the robot manually while the machine is moving.

(8) Do not clean and maintain the host of the robot and charging pile unless the robot is shutdown

or powered off.

(9) Do not use the harden or sharp objects to collide with the robot.

(10)Do not spill any liquid into the robot.

(11) The robot must be kept upright, non-tilting.

(12)The robot is an electronic product. Please keep it away from fire.

(13)Before transport the product, please discharge disinfectant first, and ensure that the host of the

robot is powered off. It is recommended to use the original packaging box for packaging.

Summary of Contents for PEANUT M2
























Reviews: