9
1. When using disinfectant, please follow relevant regulations and pay attention to safety;;
2. Ultraviolet radiation should be used in unmanned state to prevent harm to people;
3.2.2.3 Settings
Press the ‘Settings’ button at the top left of the main page and enter the 4-digit password to
enter the setting page.
Users can set the number of cycles for spraying disinfection, duration of stay at destination,
Spray intensity, sound volume, new password, robot unlock switch during pause, working time,
instant charging, and so son.
Among these settings, the number of cycles for spraying disinfection: It refers to the number of
cycles for spraying disinfection by the robot on the given route, which is only available under on-
the-way mode. Users can set 1-5 times, or unlimited times.
Spray intensity: refers to the speed of spraying under the on-the-way mode and dual mode.
Duration of stay at destination: refers to the ultraviolet irradiation time (15min – 90min) under
the fixed-point mode and dual mode.
Robot unlock switch during pause: if this setting is turned off, the user clicks on the screen,
and the robot will be locked when the robot pauses, then the user cannot push the robot to move
manually.
The function of automatically closing ultraviolet rays when people around: this function can be
3.3 Charging
turned on or off by button; when the function is turned on, when the robot detects that someone is
approaching within
2
meters in front of the robot in the process of ultraviolet disinfection, it will
automatically turn off the ultraviolet ray, so as to prevent injury to personnel.
