KeeNetic EXTRA KN-1710, Command Reference Manual

Page: 156 / 354

3.20.109 interface tunnel source
Description Set the local end of tunnel. If it is used in conjunction with an automatic IPSec
connection associated with the tunnel, then the reception mode of IPsec IKE
connections is activated to establish a secure tunnel.
Command with no prefix resets the setting.
Prefix no Yes
Change settings Yes
Multiple input No
Interface type Tunnel
Synopsis
(config-if)>
tunnel source
(
auto
| ‹
interface
› | ‹
address
› )
(config-if)>
no tunnel source
Arguments
Description Value Argument
Set the current working WAN interface.
Keyword auto
Full interface name or an alias.
Interface
name interface
Local IP-adress of the tunnel.
IP-address address
Example
(config-if)> tunnel source auto
Network::Interface::Tunnel: "Gre0": source interface set to auto.
(config-if)> no tunnel source
Network::Interface::Tunnel: "Gre0": source was reset.
History
Version Description
The interface tunnel source command has been
introduced.
2.08
The auto argument has been added. 2.09
3.20.110 interface tx-burst
Description Enable Wi-Fi packet aggregation (Tx Burst). By default, the setting is disabled.
Command with no prefix disables the setting.
Prefix no Yes
Change settings Yes
Multiple input No
Command Reference Guide — Keenetic Extra (KN-1710)
156
Chapter 3 Command Reference